MB QUART MOBILE - DISCUS SERIES



DK1-169

Description:

6x9" coaxial Discus speaker with .75" aluminum dome tweeter. Category: Discus Speakers SKU: upc-dk1-169

Specifications:

POWER HANDLING RMS 45 watts POWER HANDLING PEAK 90 watts IMPEDANCE 4 Ohm SENSITIVITY (1 WATT / 1 METER) 91db FREQUENCY RESPONSE +/- 10DB 20 - 20,000Hz CROSSOVER SLOPE 12db/octave CUT-OUT Ø 5.91" x 8.64" (oval) CHASSIS DEPTH FROM FLANGE 3.21"

Features & Benefits:

All new ground-up designs Stamp-cast deep drawn steel baskets Aluminum dome tweeters 12db/octave crossover networks Euro-DIN chassis for simple installation

DK1-116

Description:

6.5" coaxial Discus speaker with .75" aluminum dome tweeter. Category: Discus Speakers SKU: upc-dk1-116

Specifications:

POWER HANDLING RMS 35 watts POWER HANDLING PEAK 70 watts IMPEDANCE 4 Ohm SENSITIVITY (1 WATT / 1 METER) 91db FREQUENCY RESPONSE +/- 10DB 20 - 20,000Hz CROSSOVER SLOPE 12db/octave CUT-OUT Ø 5.72" CHASSIS DEPTH FROM FLANGE 2.61"

Features & Benefits:

All new ground-up designs Stamp-cast deep drawn steel baskets Aluminum dome tweeters 12db/octave crossover networks Euro-DIN chassis for simple installation

DK1-113

Description:

5.25" coaxial Discus speaker with .75" aluminum dome tweeter. Category: Discus Speakers SKU: upc-dk1-113

Specifications:

POWER HANDLING RMS 25 watts POWER HANDLING PEAK 50 watts IMPEDANCE 4 Ohm SENSITIVITY (1 WATT / 1 METER) 89db FREQUENCY RESPONSE +/- 10DB 20 - 20,000Hz CROSSOVER SLOPE 12db/octave CUT-OUT Ø 4.49" CHASSIS DEPTH FROM FLANGE 2.11"

Features & Benefits:

All new ground-up designs Stamp-cast deep drawn steel baskets Aluminum dome tweeters 12db/octave crossover networks Euro-DIN chassis for simple installation

DC1-216

Description:

6.5" component with 1" aluminum dome tweeter. Category: Discus Speakers SKU: upc-dc1-216 Part #: DC1-216

Specifications:

POWER HANDLING RMS 45 watts POWER HANDLING PEAK 90 watts IMPEDANCE 4 Ohm SENSITIVITY (1 WATT / 1 METER) 91db FREQUENCY RESPONSE +/- 10DB 20 - 20,000Hz CROSSOVER SLOPE 12db/octave CUT-OUT Ø 5.72" CHASSIS DEPTH FROM FLANGE 2.61"

Features & Benefits:

All new ground-up designs Stamp-cast deep drawn steel baskets Aluminum dome tweeters 12db/octave crossover networks Euro-DIN chassis for simple installation

DS1-304

Description:

12" Discus Series shallow subwoofer with poly cone and 2" voice coil. Coming Soon! Category: Discus Subwoofers SKU: upc-ds1-304 Part #: DS1-304

Specifications:

POWER HANDLING RMS 200 watts POWER HANDLING PEAK 400 watts IMPEDANCE 2 x 4 Ohm SENSITIVITY (1 WATT / 1 METER) 86dB CUT-OUT Ø 10.67" (271mm) CHASSIS DEPTH FROM FLANGE 3.07" (78mm)

Features & Benefits:

12" Shallow Subwoofer Dual 2" 4-Ohm Voice Coils 400 Watts Power Handling All new design based on popular RLP shallow subs Stamp-cast deep drawn steel basket Durable heavy textured powder coat 2” dual voice coil Vented aluminum voice coil former UV rubber surround Thermal formed PP cone & dust cap Works well in sealed and ported applications

DS1-254

Description:

10" Discus Series shallow subwoofer with poly cone and 2" voice coil. Coming Soon! Category: Discus Subwoofers SKU: upc-ds1-254 Part #: DS1-254

Specifications:

POWER HANDLING RMS 200 watts POWER HANDLING PEAK 400 watts IMPEDANCE 2 x 4 Ohm SENSITIVITY (1 WATT / 1 METER) 82dB CUT-OUT Ø 9.13" (232mm) CHASSIS DEPTH FROM FLANGE 2.95" (75mm)

Features & Benefits:

10" Shallow Subwoofer Dual 2" 4-Ohm Voice Coils 400 Watts Power Handling All new design based on popular RLP shallow subs Stamp-cast deep drawn steel basket Durable heavy textured powder coat 2” dual voice coil Vented aluminum voice coil former UV rubber surround Thermal formed PP cone & dust cap Works well in sealed and ported applications

DS1-204

Description:

8" Discus Series shallow subwoofer with poly cone and 2" voice coil. Coming Soon! Category: Discus Subwoofers SKU: upc-ds1-204 Part #: DS1-204

Specifications:

POWER HANDLING RMS 200 watts POWER HANDLING PEAK 400 watts IMPEDANCE 2 x 4 Ohm SENSITIVITY (1 WATT / 1 METER) 81dB CUT-OUT Ø 7.24" (184mm) CHASSIS DEPTH FROM FLANGE 2.80" (71mm)

Features & Benefits:

8" Shallow Subwoofer Dual 2" 4-Ohm Voice Coils 400 Watts Power Handling All new design based on popular RLP shallow subs Stamp-cast deep drawn steel basket Durable heavy textured powder coat 2” dual voice coil Vented aluminum voice coil former UV rubber surround Thermal formed PP cone & dust cap Works well in sealed and ported applications

DW1-304

Description:

12" DVC subwoofer. Category: Discus Subwoofers SKU: upc-dw1-304 Part #: DW1-304

Specifications:

POWER HANDLING RMS 200 watts POWER HANDLING PEAK 400 watts POWER @ 4-OHMS 4 Ohm x 4 Ohm IMPEDANCE 88db SENSITIVITY (1 WATT / 1 METER) N/A CUT-OUT Ø 11.02 CHASSIS DEPTH FROM FLANGE 5.59

Features & Benefits:

All new ground-up design Stamp-cast deep drawn steel basket Durable heavy textured powder coat 2” dual voice coil Vented aluminum voice coil former UV rubber surround Thermal formed PP cone & dust cap Works well in sealed and ported applications

DA1-3000.1

Description:

3000 watt mono amplifier. Category: Discus Amplifiers SKU: upc-da1-3000-1 Part #: DA1-3000.1

Specifications:

POWER @ 1-OHM 1x3000W POWER @ 2-OHMS 1x1500W POWER @ 4-OHMS 1x750W MONO BRIDGED @ 2-OHMS N/A MONO BRIDGED @ 4-OHMS N/A FREQUENCY RESPONSE 10Hz-300Hz SIGNAL TO NOISE RATIO >95dB THD % <0.10% variable hi-pass n />A VARIABLE LOW-PASS 40Hz-300Hz VARIABLE SUBSONIC FILTER 10Hz-40Hz 45HZ BASS BOOST 0~12dB AMPLIFIER FUSING External ANL (250A Recommended) INPUT (RCA JACK) Yes REMOTE LEVEL CONTROL Yes DIMENSIONS (L X H X W) 19.3 x 9 x 2.2" (492×230×56mm)

Features & Benefits:

All new ground-up design Focused mass aluminum heat sinks 6.5” wide PCB’s provide better parts spacing Ample extrusion length for high thermal performance Three-stage protection circuits On-board fusing for all models

DA1-2000.4

Description:

2000 watt four channel amplifier. Category: Discus Amplifiers SKU: upc-da1-2000-4 Part #: DA1-2000.4

Specifications:

POWER @ 1-OHM N/A POWER @ 2-OHMS 4x500W POWER @ 4-OHMS 4x250W MONO BRIDGED @ 2-OHMS N/A MONO BRIDGED @ 4-OHMS 2x1000W FREQUENCY RESPONSE 10Hz-45KHz SIGNAL TO NOISE RATIO >91dB THD % 0.5% variable hi-pass 60hz-1.2khz variable low-pass 30hz-250hz variable subsonic filter 45HZ BASS BOOST 0~12dB AMPLIFIER FUSING 40A x 4 INPUT (RCA JACK) Yes REMOTE LEVEL CONTROL N/A DIMENSIONS (L X H X W) 21.7 x 9 x 2.2" (552×230×56mm)

Features & Benefits:

All new ground-up design Focused mass aluminum heat sinks 6.5” wide PCB’s provide better parts spacing Ample extrusion length for high thermal performance Three-stage protection circuits On-board fusing for all models

DA1-2400.1

Description:

2400 watt mono amplifier. Category: Discus Amplifiers SKU: upc-da1-2400-1 Part #: DA1-2400.1

Specifications:

POWER @ 1-OHM 1x2400W POWER @ 2-OHMS 1x1200W POWER @ 4-OHMS 1x650W MONO BRIDGED @ 2-OHMS N/A MONO BRIDGED @ 4-OHMS N/A FREQUENCY RESPONSE 10Hz-300Hz SIGNAL TO NOISE RATIO >95dB THD % VARIABLE LOW-PASS 40Hz-300Hz VARIABLE SUBSONIC FILTER 10Hz-40Hz 45HZ BASS BOOST 0~12dB AMPLIFIER FUSING 70A x 2 INPUT (RCA JACK) Yes REMOTE LEVEL CONTROL Yes DIMENSIONS (L X H X W) 17.0 x 9 x 2.2" (432×230×56mm)

Features & Benefits:

All new ground-up design Focused mass aluminum heat sinks 6.5” wide PCB’s provide better parts spacing Ample extrusion length for high thermal performance Three-stage protection circuits On-board fusing for all models

DA1-1800.1

Description:

1800 watt mono amplifier. Category: Discus Amplifiers SKU: upc-da1-1800-1 Part #: DA1-1800.1

Specifications:

POWER @ 1-OHM 1x1800W POWER @ 2-OHMS 1x900W POWER @ 4-OHMS 1x500W MONO BRIDGED @ 2-OHMS N/A MONO BRIDGED @ 4-OHMS N/A FREQUENCY RESPONSE 10Hz-300Hz SIGNAL TO NOISE RATIO >95dB THD % VARIABLE LOW-PASS 40Hz-300Hz VARIABLE SUBSONIC FILTER 10Hz-40Hz 45HZ BASS BOOST 0~12dB AMPLIFIER FUSING 70A x 2 INPUT (RCA JACK) Yes REMOTE LEVEL CONTROL Yes DIMENSIONS (L X H X W) 15.4 x 9 x 2.2" (392×230×56mm)

Features & Benefits:

All new ground-up design Focused mass aluminum heat sinks 6.5” wide PCB’s provide better parts spacing Ample extrusion length for high thermal performance Three-stage protection circuits On-board fusing for all models

DA1-1200.2

Description:

200 watt two channel amplifier. Category: Discus Amplifiers SKU: upc-da1-1200-2 Part #: DA1-1200.2

Specifications:

POWER @ 1-OHM N/A POWER @ 2-OHMS 2x600W POWER @ 4-OHMS 2x300W MONO BRIDGED @ 2-OHMS N/A MONO BRIDGED @ 4-OHMS 1x1200W FREQUENCY RESPONSE 10Hz-45KHz SIGNAL TO NOISE RATIO >90dB THD % 0.5% variable hi-pass 60hz-1.2khz variable low-pass 30hz-250hz variable subsonic filter 45HZ BASS BOOST 0~12dB AMPLIFIER FUSING 40A x 3 INPUT (RCA JACK) Yes REMOTE LEVEL CONTROL N/A DIMENSIONS (L X H X W) 19.3 x 9 x 2.2" (492×230×56mm)

Features & Benefits:

All new ground-up design Focused mass aluminum heat sinks 6.5” wide PCB’s provide better parts spacing Ample extrusion length for high thermal performance Three-stage protection circuits On-board fusing for all models

DA1-1200.1

Description:

1200 watt mono amplifier. Category: Discus Amplifiers SKU: upc-da1-1200-1 Part #: DA1-1200.1

Specifications:

POWER @ 1-OHM 1x1200W POWER @ 2-OHMS 1x600W POWER @ 4-OHMS 1x400W MONO BRIDGED @ 2-OHMS N/A MONO BRIDGED @ 4-OHMS N/A FREQUENCY RESPONSE 10Hz-300Hz SIGNAL TO NOISE RATIO >95dB THD % <0.10% variable hi-pass n />A VARIABLE LOW-PASS 40Hz-300Hz VARIABLE SUBSONIC FILTER 10Hz-40Hz 45HZ BASS BOOST 0~12dB AMPLIFIER FUSING 80A x 1 INPUT (RCA JACK) Yes REMOTE LEVEL CONTROL Yes DIMENSIONS (L X H X W) 12.2 x 9 x 2.2" (312×230×56mm)

Features & Benefits:

All new ground-up design Focused mass aluminum heat sinks 6.5” wide PCB’s provide better parts spacing Ample extrusion length for high thermal performance Three-stage protection circuits On-board fusing for all models

DA1-1000.4

Description:

1000 watt four channel amplifier. Category: Discus Amplifiers SKU: upc-da1-1000-4 Part #: DA1-1000.4

Specifications:

POWER @ 1-OHM N/A POWER @ 2-OHMS 4x250W POWER @ 4-OHMS 4x125W MONO BRIDGED @ 2-OHMS N/A MONO BRIDGED @ 4-OHMS 2x500W FREQUENCY RESPONSE 10Hz-45KHz SIGNAL TO NOISE RATIO >90dB THD % 0.5% variable hi-pass 60hz-1.2khz variable low-pass 30hz-250hz variable subsonic filter n 45HZ BASS BOOST 0~12dB AMPLIFIER FUSING 35A x 3 INPUT (RCA JACK) Yes REMOTE LEVEL CONTROL N/A DIMENSIONS (L X H X W) 15.4 x 9 x 2.2" (392×230×56mm)

Features & Benefits:

All new ground-up design Focused mass aluminum heat sinks 6.5” wide PCB’s provide better parts spacing Ample extrusion length for high thermal performance Three-stage protection circuits On-board fusing for all models

DA1-600.4

Description:

650 watt four channel amplifier. Category: Discus Amplifiers SKU: upc-da1-600-4 Part #: DA1-600.4

Specifications:

POWER @ 1-OHM N/A POWER @ 2-OHMS 4x150W POWER @ 4-OHMS 4x75W MONO BRIDGED @ 2-OHMS N/A MONO BRIDGED @ 4-OHMS 2x300W FREQUENCY RESPONSE 10Hz-45KHz SIGNAL TO NOISE RATIO >90dB THD % 0.5% variable hi-pass 60hz-1.2khz variable low-pass 30hz-250hz variable subsonic filter 45HZ BASS BOOST 0~12dB AMPLIFIER FUSING 25A x 3 INPUT (RCA JACK) Yes REMOTE LEVEL CONTROL N/A DIMENSIONS (L X H X W) 12.2 x 9 x 2.2" (492×230×56mm)

Features & Benefits:

All new ground-up design Focused mass aluminum heat sinks 6.5” wide PCB’s provide better parts spacing Ample extrusion length for high thermal performance Three-stage protection circuits On-board fusing for all models

DA1-500.2

Description:

500 watt two channel amplifier. Category: Discus Amplifiers SKU: upc-da1-500-2 Part #: DA1-500.2

Specifications:

POWER @ 1-OHM N/A POWER @ 2-OHMS 2x250W POWER @ 4-OHMS 2x125W MONO BRIDGED @ 2-OHMS N/A MONO BRIDGED @ 4-OHMS 1x500W FREQUENCY RESPONSE 10Hz-45KHz SIGNAL TO NOISE RATIO >90dB THD % 0.5% variable hi-pass 60hz-1.2khz variable low-pass 30hz-250hz variable subsonic filter 45HZ BASS BOOST 0~12dB AMPLIFIER FUSING 30A x 2 INPUT (RCA JACK) Yes REMOTE LEVEL CONTROL N/A DIMENSIONS (L X H X W) 11.1 x 9 x 2.2" (282×230×56mm)

Features & Benefits:

All new ground-up design Focused mass aluminum heat sinks 6.5” wide PCB’s provide better parts spacing Ample extrusion length for high thermal performance Three-stage protection circuits On-board fusing for all models

301 346 0171 - 301 208 3806

Contáctenos!